User Manual
Table Of Contents
- NXR-ZGW/-ZRPNetLinx ZigBee Compatible Gatewayand Repeater
- Overview
- Installation
- Setting up a Network
- NXR-ZGW Browser-based Configuration Manager Pages
- Summary of Gateway Settings
- Configuration
- Personal Area Network (PAN)
- Network
- Enabling and disabling the wireless network
- Setting the PAN channel
- Security
- Access List
- Connections
- Finding a device’s EUI address
- Finding the device’s description
- Determining the device type
- Finding the amount of time a signal takes from the device to the gateway and back
- Determining the device link quality
- Checking the device link status
- PAN Device Details
- Putting a device on the Access List
- Removing a device from the Access List
- Locating the device
- Changing a Connected Device description
- Changing a device’s ZigBee networking information
- Utilities
- Device Configuration
NXR-ZGW Browser-based Configuration Manager Pages
17
NXR-ZGW/-ZRP
User Settings
This page is used to set the username and password for access to the NXR-ZGW web server pages.
Setting a new username and password
1.
In the menu on the top of the NXR-ZGW Browser-based Configuration Manager, select User
Settings under the section Configuration.
2. In the text field next to New Username, type the new name.
3. In the text field next to New Password, type the new password.
4. Confirm the password in the field Re-type Password.
5. Click Accept.
FIG. 9 User Settings page
User Settings Page
New Username Text field for new username.
New Password Text field for new password.
Re-type Password Text field to confirm new password.
The default username and password are “Admin” and “1988”, respectively; changing
the password as soon as possible is highly recommended.