User Manual
Table Of Contents
- NXR-ZGW/-ZRPNetLinx ZigBee Compatible Gatewayand Repeater
- Overview
- Installation
- Setting up a Network
- NXR-ZGW Browser-based Configuration Manager Pages
- Summary of Gateway Settings
- Configuration
- Personal Area Network (PAN)
- Network
- Enabling and disabling the wireless network
- Setting the PAN channel
- Security
- Access List
- Connections
- Finding a device’s EUI address
- Finding the device’s description
- Determining the device type
- Finding the amount of time a signal takes from the device to the gateway and back
- Determining the device link quality
- Checking the device link status
- PAN Device Details
- Putting a device on the Access List
- Removing a device from the Access List
- Locating the device
- Changing a Connected Device description
- Changing a device’s ZigBee networking information
- Utilities
- Device Configuration
NXR-ZGW Browser-based Configuration Manager Pages
16
NXR-ZGW/-ZRP
3. Type the Domain Suffix in the field provided.
4. Type the necessary DNS IP numbers in the fields.
5. Click Accept.
6. In the The system will need to reboot for changes to take effect window, click OK.
NetLinx Settings
This page specifies the ICSP connection to the NetLinx master.
Setting the ICSP connection to the Netlinx master
1.
In the menu at the top of the NXR-ZGW Browser-based Configuration Manager, select NetLinx
Settings under the section Configuration.
2. Enter the device number to be assigned to the NXR-ZGW in the Device Number field.
3. Enter the IP address of the master that the NXR-ZGW is to connect with in the Master IP/URL
field.
4. If you have enabled password security on your master, you need to set the username and password
within the fields provided.
5. Click Accept.
6. In the The system will need to reboot for changes to take effect window, click OK.
FIG. 8 NetLinx Settings Page
NetLinx Settings Page
Connection Displays the ICSP connection status (Not Connected/Connected)
Mode Master connection mode (URL)
URL The device connects to the specific IP/URL of a master via a TCP connection.
System Number The ICSP system number.
Device Number The ICSP device number.
Master IP/URL IP or URL of master for URL master connection mode
Master Port Number The ICSP socket port number.
Username The ICSP network username
Password The ICSP network password
Setting the Host Name requires DNS implementation on the IP network.