User Manual
Table Of Contents
- NXR-ZGW/-ZRPNetLinx ZigBee Compatible Gatewayand Repeater
- Overview
- Installation
- Setting up a Network
- NXR-ZGW Browser-based Configuration Manager Pages
- Summary of Gateway Settings
- Configuration
- Personal Area Network (PAN)
- Network
- Enabling and disabling the wireless network
- Setting the PAN channel
- Security
- Access List
- Connections
- Finding a device’s EUI address
- Finding the device’s description
- Determining the device type
- Finding the amount of time a signal takes from the device to the gateway and back
- Determining the device link quality
- Checking the device link status
- PAN Device Details
- Putting a device on the Access List
- Removing a device from the Access List
- Locating the device
- Changing a Connected Device description
- Changing a device’s ZigBee networking information
- Utilities
- Device Configuration
NXR-ZGW Browser-based Configuration Manager Pages
13
NXR-ZGW/-ZRP
NXR-ZGW Browser-based Configuration
Manager Pages
To access the Configuration Manager pages, enter the IP address of the NXR-ZGW into your web
browser; the default IP address for the NXR-ZGW is 192.168.1.140. When prompted, enter your
username and password in the spaces provided.
Summary of Gateway Settings
The Summary of Gateway Settings page is the initial access point for the user.
Upon accessing the Configuration Manager, the user must enter a username and
password. The default entries are “Admin” and “1988”; changing the password as
soon as possible is highly recommended.
FIG. 6 Summary Page
Summary Page
Firmware The version of the software running on the device.
ZigBee Firmware The version of software running on the ZigBee processor
ZigBee Stack The main version of software running on the ZigBee processor
IP The IP address of the unit
Host The hostname of the unit.
IP Address The IP address of the unit.
Subnet Mask The subnet mask associated with IP addressing
Gateway The IP gateway used by this unit.
Device ID The ICSP device number of this unit
Wireless The state (Disabled/Enabled) of the wireless connection.
Channel The channel the ZigBee wireless will use.