User Guide

System Configuration
21
NXA-WAP250G 802.11b/g Wireless Access Point
Information
The system information pages display details on the current configuration and status of the NXA-
WAP250G, including associated wireless stations and event log messages.
System
The system information page (FIG. 14) displays basic system configuration settings, as well as the
settings for each wireless interface. The displayed settings are for status information only and are not
configurable on this page.
The displayed items on this page can be described as follows:
AP System Configuration – Displays basic system configuration settings:
 System Up Time – Length of time since the NXA-WAP250G was powered on.
 MAC Address – The physical layer address for the NXA-WAP250G’s Ethernet port.
 IP Address – The IP address configured on the NXA-WAP250G.
 IP Default Gateway – The IP address of the gateway router between the NXA-WAP250G
and management stations that exist on other network segments.
 HTTP Server – The status of the web management server.
 HTTP Server Port – The TCP port used by the web management server.
 Version – The version number of the current NXA-WAP250G software.
FIG. 14 System Information