User Guide

System Configuration
20
NXA-WAP250G 802.11b/g Wireless Access Point
Configuration Options (Cont.)
Menu Description Page
System
Administration Configures the password for management
access 24
Operation Sets the device function 24
VAP Management Manages the VAP’s traffic and priority 25
Reboot System Restarts the system and resets configuration settings to factory
defaults
25
Wireless VAP 1, 2 (Wireless VAP 2 is only available when the Operation Mode is set to AP)
Basic Enables the VAP interface and sets the SSID 26
Channel Sets the radio channel 27
WEP Configures WEP security 27
WPA-PSK Configures WPA-PSK security 28
Network
DHCP Client Enables DHCP client or manually sets an IP address 29
DHCP Server/NAT Enables DHCP server and configures NAT settings 30
PPPoE Configures PPPoE settings 31
Time & Log
SNTP Sets the system clock using SNTP 32
Update
Upgrade via the Web Page Upgrades system software from a local file 33
Upgrade via a Remote Server Upgrades system software from a file on an FTP or TFTP server 33