User Guide

System Configuration
19
NXA-WAP250G 802.11b/g Wireless Access Point
System Configuration
The NXA-WAP250G’s basic settings can be configured using the Setup Wizard, as described in the
previous chapter, “Initial Configuration.” However, for some installations, you may need to configure
specific settings that are not available in the Setup Wizard. The Advanced Setup menu provides access to
all the unit’s settings for complete control of the NXA-WAP250G’s features.
To access the Advanced Setup menus, follow these steps:
1. Use your web browser to connect to the management interface using the default IP address of
192.168.1.240 or the IP address set through the Wizard.
2. Log into the NXA-WAP250G management interface by leaving the password blank (the default),
and click “LOGIN.”
3. When the home page displays, click on Advanced Setup. The following page displays (FIG. 13).
The information in this chapter is organized to reflect the structure of the web management screens for
easy reference. However, it is recommended that you first configure a password to control access to the
management interface. For details, see the Administration section on page 24.
The Advanced Setup pages include the options in the table below. For details on configuration for each
feature, see the corresponding page number.
FIG. 13 Advanced Setup
Configuration Options
Menu Description Page
Information
System Displays a summary of NXA-WAP250G settings 21
Client Displays information on stations associated to the NXA-WAP250G 22
Network Displays DHCP client, server, NAT, and PPPoE settings 23
Event Log Displays the system message log 23