User Guide

Initial Configuration
15
NXA-WAP250G 802.11b/g Wireless Access Point
VAP1 provides higher priority for wireless communications associated with this SSID, relative
to the second SSID (VAP2).
Enter the SSID, or wireless network name, which all wireless stations must use to associate
with the NXA-WAP250G. The SSID is case sensitive and can consist of up to 32 alphanumeric
characters (Default: Wireless Network - 1).
The NXA-WAP250G offers two wireless security options; Wired Equivalent Privacy (WEP) or
Wi-Fi Protected Access Pre-shared Key (WPA-PSK). Select the security you want to use and
enter the appropriate encryption key, or select “None” for no security.
 WEP Key — Enter 10 hexadecimal digits (0 to 9 and A to F) or 5 alphanumeric characters for
64 bit keys, 26 hexadecimal digits or 13 alphanumeric characters for 128 bit keys, and 32
hexadecimal digits or 16 alphanumeric characters for 152 bit keys.
 WPA-PSK Key — Enter as an easy-to-remember form of letters and numbers. The key must
be from 8 to 63 characters, which can include spaces.
FIG. 9 Setup Wizard - DHCP Server and NAT Settings
It is recommended to restrict one VAP network for only AMX Control Panels and let
all other wireless devices use the other VAP network or the second SSID (FIG. 10).
FIG. 10 Setup Wizard - Setting the VAP#1 SSID and Security
Step 3: Wireless VAP #1 Setting