Specifications
Table Of Contents
- NXA-WAP1000Smart Wireless Access Point
- NXA-WAPZD1000 Smart Wireless Access Point
- NXA-WAPZD1000 Installation
- Preconfiguring the NXA-WAP1000
- Configuring for Management by NXA-WAPZD1000
- Configuring for Standalone Operation
- What You Will Need
- 1. Prepare the Administrative Computer
- 2. Connect the NXA-WAP1000 to the Administrative Computer
- 3. Log Into the AP’s Web Interface
- 4. Configure the Wireless Settings
- Configure Common Wireless Settings
- Configure Wireless # Settings
- 5. Disconnect the AP from the Administrative Computer
- 6. Restore the Administrative Computer’s Network Settings
- Verify NXA-WAP1000 Operation
- Deploy the Access Point
- Troubleshooting Installation
- Browser-Based Configuration Pages
Browser-Based Configuration Pages
20
NXA-WAP1000 Smart Wireless Access Point
The NXA-WAP1000 Browser-Based Configuration Page interface appears (FIG. 7).
FIG. 7 NXA-WAP1000 Browser-Based Configuration Page interface
Interface Specifications
Menu: Under each category (Status, Configuration, etc.) are options that, when
clicked, open the related workspace in the area to the right.
Logout Button: Click this button to log out of the NXA-WAP1000.
Help button: Click this button to open a help window with information related specifically to
the options currently displayed in the workspace.
Workspace: This large area displays features, options and indicators relevant to your menu
bar choices.
Menu
Logout button
Help button
Workspace
If the NXA-WAP1000 is connected to an NXA-WAPZD1000 ZoneDirector, the
interface appearance will be dictated by the ZoneDirector. The Status: Device page
will also display a link to the ZoneDirector in question.