Specifications

NXA-PDU-1508-8 (110V/220V)
5
NXA-PDU-1508-8 Power Distribution Unit
Rack-Mounting
Before rack mounting the PDU, pay particular attention to the following factors:
Temperature: Since the temperature within a rack assembly may be higher than the ambient room
temperature, check that the rack-environment temperature is within the specified operating
temperature range.
Mechanical Loading: Do not place any equipment on top of a rack-mounted unit.
Circuit Overloading: Be sure that the supply circuit to the rack assembly is not overloaded.
Grounding: Rack-mounted equipment should be properly grounded. Particular attention should be
given to supply connections other than direct connections to the mains.
The NXA-PDU-1508-8 can be mounted in a standard 19-inch equipment rack:
1. Attach the brackets to the PDU using the bracket screws provided in the Bracket Mounting Kit (FIG. 4).
2. Mount the PDU in the rack, using 4 rack-mounting screws (not provided, see FIG. 5).
For safety, the socket-outlet should be installed near the NXA-PDU-1508-8 and must
be easily accessible.
FIG. 4 Attaching the Brackets
FIG. 5 Installing the PDU in a Rack
Mounting bracket
PDU
Bracket screws
Mounting bracket on PDU
Rail on equipment rack