Specifications

Browser-Based Configuration Pages

NXA-ENET8POE Gigabit PoE Ethernet Switch

Port-based

The port-based QoS can prioritize each specified port. When QoS Mode is set to Port-based, the Port Priority

Configuration table appears which allows a priority to be set for each port.

You can use the Prioritize Traffic drop-down list to set the values in the Port Priority Configuration table.

Select All Low Priority to set all values to low priority, All Normal Priority to set all values to normal priority,

All Medium Priority to set all values to medium priority, or select All High Priority to set all values to high

priority. Use Custom if you want to set each value individually.

802.1p

The 802.1p field is held within the VLAN-tag of a packet. The field is three bits long so can hold eight values;

0 - 7 inclusive. When QoS Mode is set to 802.1p, the 802.1p Configuration table appears which allows a

priority to be set for each of the eight values.

You can use the Prioritize Traffic drop-down list to quickly set the values in the 802.1p Configuration table.

Select All Low Priority to set all values to low priority, All Normal Priority to set all values to normal priority,

All Medium Priority to set all values to medium priority, or select All High Priority to set all values to high

priority. Use Custom if you want to set each value individually.

DSCP

The Differentiated Services Code Point (DSCP) is a six bit field that is contained within an IP (TCP or UDP)

header. Six bits allows the DSCP field to take any value in the range 0 - 63 inclusive. When QoS Mode is set to

DSCP, the DSCP Configuration table appears which allows a priority to be set for each of the DSCP values.

You can use the Prioritize Traffic drop-down list to quickly set the values in the DSCP Configuration table.

Select All Low Priority to set all values to low priority, All Normal Priority to set all values to normal priority,

All Medium Priority to set all values to medium priority, or select All High Priority to set all values to high

priority. Use Custom if you want to set each value individually.

QOS - Settings page (Cont.)

Prioritize Traffic: Use the Prioritize Traffic drop-down list to quickly set the values in each table.

• All Low Priority to set all values to low priority,

• All Normal Priority to set all values to normal priority.

• All Medium Priority to set all values to medium priority.

• All High Priority to set all values to high priority.

• Use Custom if you want to set each value individually.

Help:

Links directly to web help.

Apply:

Sets specified values to the system.

Cancel:

Discards all changes and restores current values.

Because end-stations, like PCs, are not usually VLAN aware, they do not create

VLAN-tagged frames. As a result, this method of prioritization is not ideal when many

PCs are connected to the NXA-ENET8POE.