Specifications

Browser-Based Configuration Pages
47
NXA-ENET8POE Gigabit PoE Ethernet Switch
Status
This page shows RSTP bridge and port states.
FIG. 33 RSTP - Status page
RSTP - Status page
RSTP Bridge Overview:
Hello Time:
Interval (in seconds) at which the root device transmits a configuration
message (BPDU frame). Number between 1 - 10 (default is 2).
Max Age:
The maximum time (in seconds) a device can wait without receiving a
configuration message before attempting to reconfigure. That also means the
maximum life time for a BPDU frame. Number between 6 - 40 (default is 20).
Forward Delay:
The maximum time (in seconds) the root device will wait before changing
states (i.e., discarding to learning to forwarding). Number between 4 - 30
(default is 15).
Topology:
Shows the NXA-ENET8POE’s current state
Root ID:
The root port ID for the NXA-ENET8POE.
RSTP Port Status:
Port/Trunk:
Port/Trunk ID number.
VLAN ID:
VLAN IDs of the port.
Path Cost:
Show the path cost on this port.
Edge Port:
Select Yes if the port is an edge port which connects to an end station.
P2p Port:
Select Yes if the port link is connected to another STP device.
Protocol:
Show the running protocol, RSTP or STP.
Port State:
Show the current port state: blocking, forwarding, learning, etc.
Help:
Links directly to web help.
Refresh:
Refreshes the page with the current status.