Specifications

Browser-Based Configuration Pages
43
NXA-ENET8POE Gigabit PoE Ethernet Switch
LLDP
This page allows you to configure the Link Layer Discovery Protocol (LLDP) configuration. LLDP allows
devices on the network to share information about themselves for the reasons of simplified troubleshooting,
enhanced network management, and maintaining an accurate network topology. LLDP-capable devices
periodically transmit information in messages called Type Length Value (TLV) fields to neighbor devices.
Settings
FIG. 30 LLDP - Settings page
LLDP - Settings page
Port: The port number
State:
You can choose to disable or enable LLDP for each port. Enabling LLDP will
allow the port to receive and transmit TLVs.
Help:
Links directly to web help.
Apply:
Sets specified values to the system.
Cancel:
Discards all changes and restores current values.