Specifications

Browser-Based Configuration Pages
32
NXA-ENET8POE Gigabit PoE Ethernet Switch
LACP Setup
The NXA-ENET8POE supports both static trunking and dynamic Link Aggregation Control Protocol (LACP).
LACP configured ports can automatically negotiate a trunked link with LACP-configured ports on another
device. You can configure any number of ports on the switch as LACP, as long as they are not already
configured as part of a static trunk. If ports on another device are also configured as LACP, the switch and the
other device will negotiate a trunk link between them.
FIG. 22 Trunks - LACP Setup page
Trunks - LACP Setup page
Port: The port number.
Enabled:
Enables LACP on the associated port when selected.
Key Value:
Ports in an aggregated link group must have the same LACP port Key. For a
port to be allowed to join an aggregated group, the port Key must be set to the
same value. When set to zero, the port Key is automatically set by the
NXA-ENET8POE.
Help:
Links directly to web help.
Apply:
Sets specified values to the system.
Cancel:
Discards all changes and restores current values.