Specifications

Browser-Based Configuration Pages
26
NXA-ENET8POE Gigabit PoE Ethernet Switch
Ports
From the Ports section, you can configure the speed and duplex mode of individual ports, set the broadcast
storm control parameters, set up the port mirroring features of the switch to enable traffic monitoring, and
diagnose cable faults.
Settings
You can use the Port Configuration page to manually set the speed, duplex mode, and flow control.
FIG. 16 Ports - Settings page
Ports - Settings page
Enable Jumbo Frames: Click this box to enable larger frames in the Browser-Based Configuration
Pages than usual.
Power Saving Mode:
Select Enable or Disable from the dropdown list.
Port:
The individual front port on the NXA-ENET8POE.
Speed/Duplex:
Allows you to manually set the port speed and duplex mode.
Flow Control:
Allows flow control to be enabled or disabled. When the box is checked, flow
control is enabled.
Trunk:
Indicates if a port is a member of a trunk.
Help:
Links directly to web help.
Apply:
Sets specified values to the system.
Cancel:
Discards all changes and restores current values.