Specifications

Browser-Based Configuration Pages
25
NXA-ENET8POE Gigabit PoE Ethernet Switch
Tools
On the Tools page, you can restore the NXA-ENET8POE to default settings, upgrade the firmware of the
device, or restart the device.
FIG. 15 System - Tools page
System - Tools page
Restore to Factory Defaults: Forces the switch to restore the original factory settings. To reset the switch,
select Reset to Factory Defaults from the drop-down list and click APPLY. The
LAN IP Address, Subnet Mask and Gateway IP Address will be reset to their
factory defaults.
Upgrade Firmware:
Upgrades the switch system firmware. Select Upgrade Firmware from the
drop-down list and then click on the Browse button to select the firmware file.
Click the APPLY button to upgrade the selected device firmware file.
Upload/Download
Configuration:
To upload or download the configuration file, select Upload/Download
Configuration from the drop-down list, then click Upload or Download, and
then click on the Browse button to select the file.
Restart Switch:
To restart the NXA-ENET8POE, select from the drop-down list, and then click
APPLY. The reset will be complete when the Browser-Based Configuration
Pages displays the login page.
Help:
Links directly to web help.
Apply:
Sets specified values to the system.