Specifications

Browser-Based Configuration Pages
20
NXA-ENET8POE Gigabit PoE Ethernet Switch
Statistics
You can display statistics on network traffic from the ports. These statistics can be used to identify potential
problems with the NXA-ENET8POE (such as a faulty port or unusually heavy loading). All values displayed
have been accumulated since the last system reboot, but can be reset to zero by clicking the Clear button. The
current statistics are not displayed until you click the Refresh button.
FIG. 10 Status - Statistics page
Status - Statistics page
Port Statistics:
Port Number:
The current port.
Port Speed/Duplex:
The current speed and duplex status.
Received Octets:
The total number of octets received on the interface, including framing
characters.
Received Packets:
The number of subnetwork-unicast packets delivered to a higher-layer
protocol.
Received Broadcast/
Multicast Packets:
The number of packets, delivered by this sub-layer to a higher (sub-)layer,
which were addressed to a multicast address at this sub-layer.
Received Errors:
The number of inbound packets that contained errors preventing them from
being deliverable to a higher-layer protocol.
Transmitted Octets:
The total number of octets transmitted out of the interface, including framing
characters.
Transmitted Packets:
The total number of packets that higher-level protocols requested be
transmitted to a subnetwork-unicast address, including those that were
discarded or not sent.
Transmitted Broadcast/
Multicast Packets:
The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a multicast address at this
sub-layer, including those that were discarded or not sent.
Transmitted Errors:
The number of outbound packets that could not be transmitted because of
errors.
Help:
Links directly to web help.
Pause:
Freezes incoming statistics at that point. Press Continue to proceed with
statistics collection.
Clear:
Discards all values.