Specifications

Browser-Based Configuration Pages

NXA-ENET8POE Gigabit PoE Ethernet Switch

Configuration Page Interface

The NXA-ENET8POE provides an embedded HTTP web agent. Using a web browser, you can configure the

device and view statistics to monitor network activity. The web agent can be accessed by any computer on the

network using a standard web browser (Internet Explorer 5.5 or above, or Mozilla Firefox 1.0 or above).

Prior to accessing the switch from a web browser, be sure you have first performed the following tasks:

1. Configure the switch with a valid IP address, subnet mask, and default gateway. (Defaults: IP address

192.168.2.10; Subnet mask 255.255.255.0; Gateway 0.0.0.0)

2. Set a new password using the web interface. (Default: “admin”). For more information, please refer to

the Initial Configuration section on page 15

After entering the new password at the Login page, the Home page is displayed (FIG. 8). The home page

displays the menu on the left side of the screen and the workspace on the right side. The Menu links are used to

navigate to other pages, and the workspace displays configuration parameters and statistics.

If you cannot remember the switch's IP address, you can restore the original settings

by following the procedure described in the Password section on page 23.

FIG. 8 Home Page layout

Home Page

Menu: Click any of the links in the Menu to open a submenu. Click on any submenu

link to open the appropriate page.

Front Panel Indicators:

This display shows which of the eight ports on the NXA-ENET8POE are being

used at this time. The port will turn green when the corresponding front-panel

port is in connection with another device. To show the port number, hover your

cursor over the intended port.

Workspace:

This section displays the appropriate page from the Menu submenus.

Front Panel Indicators

Workspace