Specifications

Network Planning
13
NXA-ENET8POE Gigabit PoE Ethernet Switch
Cable Labeling and Connection Records
When planning a network installation, it is essential to label the opposing ends of cables and to record where
each cable is connected. Doing so will enable you to easily locate inter-connected devices, isolate faults and
change your topology without need for unnecessary time consumption.
To best manage the physical implementations of your network, follow these guidelines:
Clearly label the opposing ends of each cable.
Using your building’s floor plans, draw a map of the location of all network-connected equipment.
For each piece of equipment, identify the devices to which it is connected.
Note the length of each cable and the maximum cable length supported by the switch ports.
For ease of understanding, use a location-based key when assigning prefixes to your cable labeling.
Use sequential numbers for cables that originate from the same equipment.
Differentiate between racks by naming accordingly.
Label each separate piece of equipment.
Display a copy of your equipment map, including keys to all abbreviations at each equipment rack.