Specifications

NXA-ENET8POE Gigabit PoE Ethernet Switch
3
NXA-ENET8POE Gigabit PoE Ethernet Switch
NXA-ENET8POE Architecture
The NXA-ENET8POE employs a wire-speed, non-blocking switching fabric. This permits simultaneous wire-
speed transport of multiple packets at low latency on all ports. The device also features full-duplex capability
on all ports, which effectively doubles the bandwidth of each connection.
The NXA-ENET8POE uses store-and-forward switching to ensure maximum data integrity. With store-and-
forward switching, the entire packet must be received into a buffer and checked for validity before being
forwarded. This prevents errors from being propagated throughout the network.
Power-over-Ethernet Capability
The NXA-ENET8POE’s eight 10/100/1000 Mbps ports support the IEEE 802.3af Power-over-Ethernet (PoE)
standard that enables DC power to be supplied to attached devices using wires in the connecting Ethernet
cable. Any 802.3af compliant device attached to a port can directly draw power from the switch over the
Ethernet cable without requiring its own separate power source. This capability gives network administrators
centralized power control for devices such as IP phones and wireless access points, which translates into
greater network availability.
For each attached 802.3af-compliant device, the switch automatically senses the load and dynamically
supplies the required power. Independent overload and short-circuit protection for each port allows the switch
to automatically shut down a port’s power when limits are exceeded. Port 1 on the switch can provide up to 25
W of power to an attached device at the standard 48 DC voltage. Ports 2-8 can provide up to 15.4 W of power.
NXA-ENET8POE Specifications (Cont.)
Operating Environment: • Operating temperature: 32° F to 113° F (0° C to 45° C)
• Non-operating temperature: -40° F to 158° F
(-40° C to 70° C)
• Max. relative humidity: 90% (Non-condensing)
Certifications: • FCC part 15 Class A
•CE
• UL Listed (US and Canada)
•RoHS
• CISPR Class A
• VCCI (Pending)
• C-TICK (Pending)
Other AMX Equipment: • NXA-WAP1000 Smart Wireless Access Point, US Operation (FG2255-51)
• NXA-WAP1000 Smart Wireless Access Point, Operation Outside US
(FG2255-53)
• NXA-WAPZD1000 Wireless LAN Zone Director, US Operation (FG2255-52)
• NXA-WAPZD1000 Wireless LAN Zone Director, Includes EU Power Adapter
for use in Europe (except UK), Chile, Egypt, Indonesia, Pakistan, Saudi
Arabia (except Dharan), Vietnam (FG2255-54K)
• NXA-WAPZD1000 Wireless LAN Zone Director, Includes AU Power Adapter
for use in Australia and New Zealand (FG2255-55K)
• NXA-WAPZD1000 Wireless LAN Zone Director, Includes China AU style
CCC certified Power Adapter for use in China (FG2255-56K)
• NXA-WAPZD1000 Wireless LAN Zone Director, Includes India Power
Adapter (FG2255-57K)
• NXA-WAPZD1000 Wireless LAN Zone Director, Includes Korea Power
Adapter (FG2255-58K)
• NXA-WAPZD1000 Wireless LAN Zone Director, Includes UK Power Adapter
for use in the United Kingdom, Hong Kong, Malaysia, Singapore, and United
Arab Emirates (UAE) (FG2255-59K)
• NXA-WAPZD1000 Wireless LAN Zone Director, Includes US Power Adapter
with 110 and 220 power input for use in Brazil, Philippines, Saudi Arabia
(Dharan), Taiwan, Thailand, Uruguay (FG2255-60K)