User's Manual

Port Configuration
96
NXA-ENET24 - Software Management Guide
Displaying LACP Settings and Status for the Local Side - CLI
The following example displays the LACP configuration settings and operational state for the local side of port
channel 1.
Displaying LACP Settings and Status for the Remote Side
You can display configuration settings and the operational state for the remote side of an link aggregation.
Displaying LACP Settings and Status for the Remote Side - Web
Click Port, LACP, Port Neighbors Information. Select a port channel to display the corresponding information.
FIG. 97 CLI - Displaying LACP Port Information
Displaying LACP Remote Settings - Neighbor Configuration Information
•Partner Admin
System ID:
LAG partner’s system ID assigned by the user.
• Partner Oper
System ID:
LAG partner’s system ID assigned by the LACP protocol.
•Partner Admin
Port Number:
Current administrative value of the port number for the protocol Partner.
• Partner Oper
Port Number:
Operational port number assigned to this aggregation port by the port’s protocol
partner.
• Port Admin Priority: Current administrative value of the port priority for the protocol partner.
• Port Oper Priority: Priority value assigned to this aggregation port by the partner.
• Admin Key: Current administrative value of the Key for the protocol partner.
• Oper Key: Current operational value of the Key for the protocol partner.
• Admin State: Administrative values of the partner’s state parameters. (See preceding table.)
• Oper State: Operational values of the partner’s state parameters. (See preceding table.)
FIG. 98
Web - Displaying Remote LACP Port Information