User guide

NX2200 User Guide
© 2012 ExaDigm, Inc. Page 11 of 17 Rev. 1/0812
13.0 Color-Coded Keys
The color-coded keys perform the following tasks:
 Red CANCEL Key: Press the red key to cancel the current operation or return to the
previous menu.
 Yellow CLEAR Key: Press this key to clear an action and backspace clearing each
character.
 Green ENTER Key: This key is used like the ENTER key on a computer keyboard. Press
the green key to signify to the terminal that the task is complete, or press to enable a function
or perform an action based on typed data.
 Orange Power Key: Press this key to turn on or off the terminal.
14.0 Terminal Indicators
Indicators are located on the display screen and will display when the mentioned peripheral or device is
attached.
 Battery
 Fully charged
 Half full battery
 Low battery
 Radio
 WiFi signal strength
 Packet exchange 1x
 CDMA signal strength
 Ethernet connection ˂----˃
 Power Adapter
15.0 Security Manager
Security manager is a service within the application that handles user authentication and the log-in
process. At least one user (of any level) has to be logged in to use any of the various components. If any
operation has access restriction, the service calls security manager to confirm the user has the necessary
credentials.
To access the User Manager menu follow the instructions below:
1. Go to Application Manager
2. Go to Admin
3. Go to System
4. Go to User Manager
5. Enter User Name and Password to access
Note: Only Admin (Manager) level has access to this menu.