Specifications

WebConsole - System Options
66
NX-Series Controllers - WebConsole & Programming Guide
Manage Devices - Manage Polled Ports
Click the Polled Ports link (in the Manage Devices tab) to access the Manage Polled Ports page (FIG. 68). The options
on this page allow you to view/modify settings for all polled ports in the System.
Note: Polled Ports must be specified in the Master’s code in order for this page to be populated.
Editing Polled Port Settings
Click the Edit button for a port in the Physical Port list to access the Edit Port Settings page (FIG. 69):
Use the drop-down menus to modify the Port settings.
Click Reset to Default Settings to return this port to its default configuration:
FIG. 68 System - Manage Devices (Manage Polled Ports)
FIG. 69 Manage Polled Ports - Edit Port Settings
Default Port Settings
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
485: Disabled
Click to open the Edit Port Settings page