Specifications

WebConsole - System Options
56
NX-Series Controllers - WebConsole & Programming Guide
System - Manage NetLinx
The Manage NetLinx tab displays a list of NetLinx devices connected to the Master, and indicates device status for each
(FIG. 59).
The table on this page consists of five columns:
FIG. 59 System - Manage NetLinx tab
NetLinx Device Details
Column Description
System: Displays the System value being used by the listed NetLinx Master.
Device: Displays the assigned device value of the listed unit. This Device entry applies to both the Master and
those NDP-capable devices currently connected to that Master.
Device Type: Displays a description of the target Master or connected device, and its current firmware version.
Example: NI Master v3.01.323.
File Name: Displays the program name and/or file resident on the device.
Status: Indicates the Master or device state:
• This Master: Indicates its the target Master currently being used and being browsed to. Its this
Master’s web pages which are currently being viewed.
• Orphan: Indicates that the device is currently not yet “bound” or assigned to communicate with a
particular Master. This state shows an adjacent Bind button which is used to bind the device to the
Master whose web pages are currently being viewed.
• Searching: Indicates that the device is trying to establish communication with it's associated Master.
• Bound: Indicates that the device has established communication with it's associated Master. This
state shows an adjacent Unbind button which is used to release/disassociate the device from
communicating with its current Master.
• Lost: Indicates that the device has tried to establish communication with it's associated or “bound”
Master, but was after a period of time, unable to establish communication.