Specifications

WebConsole - System Options
55
NX-Series Controllers - WebConsole & Programming Guide
Adding a New License
1. Click the Add New License button to access the Add a License page (FIG. 58).
2. Enter the Product ID (certificate number) provided with the product into the Product ID fields.
Contact the AMX Sales department with both the product serial number (or certificate number) and the serial
number of target Master to register your product and in turn receive the necessary Key information (typically 32 to
36 digits in length) which is then entered into the Key fields on this page.
3. Enter the Product Key into the Key fields. The Product Key is Master-specific and is typically provided by AMX
upon registration.
Example: AMX Meeting Manager and i!-Voting applications are examples of products that require both a Product
serial number and a Master-specific key prior to usage.
4. Press the Accept button to save the information. If there are no errors with the information on this page, a “Key
successfully added for Product ID XXXX” is displayed at the top of the page.
Removing a License
1. Click the Remove (x) icon to the left of the license that you want to remove.
2. The system will prompt you to verify this action before the license is removed from the Master. Click OK to
proceed.
3. Press the Accept button to save the information.
FIG. 58 Manage License - Add a License page