Specifications

WebConsole - System Options
51
NX-Series Controllers - WebConsole & Programming Guide
Manage System - Clock Manager Options
Click the Clock Mgr link (on the Manage System tab) to access the Clock Manager Options page (FIG. 53). The options
on this page allow you to enable/disable using a network time source and provide access to Daylight Saving
configuration and which NIST servers to use as a reference.
The Clock Manager Options are separated into three tabs:
Mode Settings - The Mode Manager in this tab allows you to set the Clock Manager Mode (Network Time or
Stand Alone).
Daylight Savings - The Daylight Savings Manager in this tab allows you to specify how and when to
implement Daylight Savings rules on the clock.
NIST Servers - The NIST Server Manager in this tab allows you to connect to a specific NIST (Internet Time
Service) Server.
Setting the Mode for the Clock Manager
1. In the Manage System tab (FIG. 53), select a Time Sync option.
Network Time: This option allows the Master to manage it’s clock by connecting to a NIST (Internet Time
Service) Server. When this option is selected, the Master will connect to the default NIST Server to get date
and time information.
You can select a different NIST Server (or specify the IP Address of a known NIST Server) in the NIST
Servers tab (see the Selecting a Custom NIST Server section on page 53).
Stand Alone: This option lets the Master use its own internal clock. When this option is selected, two
additional fields are available on this tab:
Date - Enter the current date in these fields (mm/dd/yyyy).
Time - Enter the current time in these fields (hh/mm/ss).
2. Click Accept to save these settings to the Master.
FIG. 53 Clock Manager Options - Mode Settings tab