Specifications

WebConsole - System Options
42
NX-Series Controllers - WebConsole & Programming Guide
All returned messages are displayed in the Incoming Messages window. By default, all messages are refreshed
every 5 seconds, as indicated by the Refresh Interval field. Use the Refresh Interval drop-down to specify how
often your messages are updated (available values = 2 seconds, 5 seconds, or 10 seconds).
The default setting is 5 seconds.
4. To add more devices to the Diagnostics Options page:
Repeat steps 1-3.
Alternatively, you can click one of the Edit buttons to open the Edit Options window, and specify a System
Number, Device and Port for a known System Device. Select the Diagnostics messages that you want to
enable for this device and click Update.
The device will appear in the Diagnostics Options window, in the next available column (to the right of the
last device added - see FIG. 48).
Note: You can monitor diagnostics for up to eight System Devices in this page.
FIG. 48 Edit Options window indicating four devices with Diagnostics enabled