Specifications

WebConsole - System Options
37
NX-Series Controllers - WebConsole & Programming Guide
Controlling or Emulating a System Device
1. Select the device that you want to Control or Emulate, via the Device Tree:
a. Click the Show Device Tree option to show the Device Tree window (if it is not already enabled).
b. In the Device Tree, click on the Information (i) icon for the device that you want to control or emulate. This
opens a Network Settings page showing network configuration details for the selected device. See the Device
Network Settings Pages section on page 21 for details.
c. Click on the Control/Emulate link. This opens a Control/Emulate Options page for the selected device
(FIG. 43).
2. Select either the Control or Emulate option.
3. In the Channel Code section, enter a valid Channel number to emulate Channel messages (i.e., Push/Release,
CHON, and CHOFF) for the specified <D:P:S>.
The Channel number range is 1 - 65535.
Select the On or Off buttons to Emulate Channel ON (CHON) and Channel OFF (CHOFF) messages for the
specified <D:P:S>.
FIG. 43 Select Control/Emulate from within a selected Device’s Network Settings page