Specifications

WebConsole - System Options
36
NX-Series Controllers - WebConsole & Programming Guide
Manage System - Control/Emulate Options
Click the Control/Emulate link (in the Manage System tab) to access the Control/Emulate Options page (FIG. 42). The
options on this page allow you to Control or Emulate a device connected to this Master.
Device Control/Emulation is accomplished by manipulating a target device’s channels, levels, and sending both send
commands and strings to the device.
To Control a device means that the program generates messages which appear to a specified device to have
come from the Master.
To Emulate a device means that the program generates messages which appear to the Master to have come
from a specified device (physical or virtual). When Emulate is selected, a Push button is added to the
Channel Code section (see FIG. 42).
Note: The System Number, Device Number, and Port Number fields are read-only. Instead of specifying these values for
a System Device, select a device via the Device Tree to populate these fields with that device’s information.
FIG. 42 Manage System tab (Control/Emulate)