Specifications

Upgrading Firmware
17
NI & DVX Central Controllers - WebConsole & Programming Guide
6. Verify the target’s System number matches the value listed within the active System folder in the OnLine Tree.
The Device number is always 0 for the NX Master.
Note that the Port field is disabled (FIG. 25).
7. Verify that the Reboot Device checkbox is selected to reboot the NX controller after the firmware update process is
complete (selected by default).
8. Click Send to begin the transfer. The file transfer progress is indicated in the Progress section of the dialog.
9. Click Close once the download process is complete.
10. In the OnLine Tree, right-click on the Master and select Refresh System. This establishes a new connection and
refreshes the device list and their firmware versions in your system.
Once the process is complete, you can upgrade the remaining firmware files. All device files must be kept at compatible
firmware versions for proper operation. Therefore, all files should be used when upgrading any firmware associated with
the Integrated Controllers.
Be sure to follow the required order for installing firmware files. See the Required Order of Firmware Updates section
on page 15 for more information.
FIG. 25 Send to NetLinx Device dialog (showing on-board NX Master firmware update)