Specifications

Initial Configuration
5
NX-Series Controllers - WebConsole & Programming Guide
3. Click the System Settings button to open the Communications Settings dialog (FIG. 5). If there is no system
selected, click the Default Settings button to open the dialog.
4. Select the USB tab to view the USB options (FIG. 6).
5. On the USB tab, highlight the Master you want to connect to and click Select.
6. Click Edit to open the Edit USB Master’s Username/Password dialog to set the user name and password for
authentication access to the Master. This step is optional. You can only change the user name and password in the
dialog. The additional fields are view-only.
7. Click OK to close the USB Master’s Username/Password dialog, and click OK in the Communication Settings
dialog to return to the Communication Settings dialog, now indicating the USB-connected Master as the current
connection configuration.
8. Click OK to close the Communication Settings dialog and return to the main application.
FIG. 5 Communication Settings dialog - Recent tab
FIG. 6 Communications Settings dialog - USB tab