Specifications

Terminal (Program Port/Telnet) Commands
113
NX-Series Controllers - WebConsole & Programming Guide
3. To proceed, enter y and press enter. The following menu will be displayed:
Select to change current security option
1) Terminal (RS232) Security...........Enabled
2) HTTP Security.......................Enabled
3) Telnet Security.....................Enabled
4) Configuration Security..............Enabled
5) ICSP Security.......................Disabled
6) ICSP Encryption Required............Disabled
7) LDAP Security.......................Disabled
Or <ENTER> to return to previous menu
4. To enable LDAP Security, enter 7 and press Enter. The same menu will be sent to the screen with LDAP Security
set to Enabled. Press enter to return to the Security Setup menu.
5. When back to the Security Setup menu, enter 13 and press Enter.
A prompt to enter the LDAP URI will be displayed. Once the URI is entered and enter is pressed, a prompt for the
next LDAP parameter will be displayed.
This will continue until all parameters are entered and then the Security Setup menu will be displayed again.
6. To save the security setup, enter 15 and press Enter.
7. To test the connection to the server enter 14 and press Enter.
This test does a bind to the BIND DN using the Search Password entered. If the bind is successful, "Connection
successful" is printed on the screen. If the server could not be reached or the bind is unsuccessful, "Could not
connect to server" is printed on the screen.
8. Press Enter to return to the main menu.
Note: Options 3 - 10 (Add user, Edit user, Delete user, Show the list of authorized users, Add group, Edit group, Delete
group, Show list of authorized groups) on the Security Setup menu are disabled when LDAP is enabled.
Security Options Menu
Select "Set system security" from the Setup Security Menu to access the Security Options menu, described below:
Security Options Menu
Command Description
1) Terminal (RS232) Security
(Enabled/Disabled)
This selection enables/disables Terminal Security. on the Program (RS232) Port.If
Terminal Security is enabled, a user must have sufficient access rights to login to a
Program Port terminal session.
2) HTTP Security 
(Enabled/Disabled)
This selection enables/disables HTTP (Web Server) Security. If HTTP Security is
enabled, a user must have sufficient access rights to access the Master’s
WebConsole via a web browser.
3) Telnet Security
(Enabled/Disabled)
This selection enables/disables Telnet Security. If Telnet Security is enabled, a user
must have sufficient access rights to login to a Telnet terminal session.
4) Configuration Security
(Enabled/Disabled)
This selection enables/disables configuration access rights for the Master. If
Configuration Security is enabled, a user must have sufficient access rights to
access the Setup Security menu (see page 111), and make changes to the Master’s
security parameters.
5) ICSP Security
(Enabled/Disabled)
This selection enables/disables security of ICSP data being transmitted between the
target Master and external AMX components (software and hardware such as TPD4
and a Modero Touch Panel).
6) ICSP Encryption Required
(Enabled/Disabled)
This selection enables/disables the need to require encryption of the ICSP
communicated data. If enabled:
• All communicating AMX components must authenticate with a valid username
and password before beginning communication with the Master.
• All communication must be encrypted.
7) LDAP Security
(Enabled/Disabled)
This selection enables/disables LDAP Security. Refer to Appendix A: LDAP
Implementation Details on page 119 for details on LDAP Implementation.