Specifications

Terminal (Program Port/Telnet) Commands
105
NX-Series Controllers - WebConsole & Programming Guide
Terminal Commands (Cont.)
Command Description
SHOW BUFFERS Displays a list of various message queues and the number of buffers in each queue
Example:
show buffers
Thread TX RX Queued
----------- ---- ---- ----
Axlink 0
UDP 0 0-Sent=NO Waiting=NO
IPCon Mgr 0
Con Manager 0
Interpreter 0
Device Mgr 0
Diag Mgr 0
Msg Dispatch 0
Cfg Mgr 0
Route Mgr 0
Notify Mgr 0
---- ---- ----
Total 0 0 0 GrandTotal 0
Note: See the SHOW MAX BUFFERS section on page 107.
SHOW COMBINE Displays a list of devices, levels, and channels that are currently combined.
Example:
> SHOW COMBINE
Combines
--------
Combined Device([33096:1:1],[96:1:1])
Combined Level([33096:1:1,1],[128:1:1,1],[10128:1:1,1])
Combined Device([33128:1:1],[128:1:1],[10128:1:1])
SHOW DEVICE <D:P:S> Displays a list of devices present on the bus, with their device attributes.
Example:
>SHOW DEVICE [0:1:0]
Local devices for system #1 (This System)
--------------------------------------------------------------------
--------
Device (ID)Model (ID)Mfg FWID Version
00000 (00256)NXC-ME260/64M (00001)AMX Corp. 00336 v3.00.312
(PID=0:OID=0) Serial=0,0,0,0,0,0,0,0,0,0,0,0,
Physical Address=NeuronID 000531589201
(00256)vxWorks Image (00001) 00337 v3.00.312
(PID=0:OID=1) Serial=N/A
(00256)BootROM (00001) 00338 v3.00.312
(PID=0:OID=2) Serial=N/A
(00256)AXlink I/F uContr(00001) 00270 v1.03.14
(PID=0:OID=3) Serial=0000000000000000