Specifications

Terminal (Program Port/Telnet) Commands
99
NX-Series Controllers - WebConsole & Programming Guide
Terminal Commands (Cont.)
Command Description
SET HTTPS PORT Sets the Master’s IP port listened to for HTTPS connections.
Note: The Master must be rebooted to enable new settings.
Example:
>SET HTTPS PORT
Current HTTPS port number = 443
Enter new HTTPS port number (Usually 443) (0=disable HTTPS):
Once you enter a value and press the ENTER key, you get the following message:
Setting HTTPS port number to
New HTTPS port number set, reboot the Master for
the change to take affect.
SET ICSLAN Sets the ICSLAN port settings.
Example:
>set icslan
--- Enter New Values or just hit Enter to keep current settings
Enter ICSLan Host Name: ICSLAN
Enter ICSLan Network octet 1: 198
Enter ICSLan Network octet 2: 18
Disable DHCP Server? (Y):
SET ICSP PORT Sets the Master’s IP port listened to for ICSP connections.
Note: The Master must be rebooted to enable new settings.
Example:
>SET ICSP PORT
Current ICSP port number = 1319
Enter new ICSP port number (Usually 1319) 
(0=disable ICSP):
Once you enter a value and press the ENTER key, you get the following message:
Setting ICSP port number to
New ICSP port number set, reboot the Master for the
change to take affect.
SET ICSP TCP TIMEOUT Sets the timeout period for ICSP and i!-Web Control TCP connections.
Note: The new timeout value is immediately (no reboot required).
Example:
>SET ICSP TCP TIMEOUT
This will set the timeout for TCP connections for both ICSP and i!-Web
Control.When no communication has been detected for the specified
number of seconds, the socket connection is closed.ICSP and i!-Web
Control have built-in timeouts and reducing the TCP timeout below
these will cause undesirable results. The default value is 45
seconds.
The current ICSP TCP timeout is 45 seconds
Enter new timeout (in seconds):
Once you enter a value and press the ENTER key, you get the following message:
New timeout value set (in affect immediately).