Specifications

WebConsole - System Options
54
NI & DVX Central Controllers - WebConsole & Programming Guide
Manage System - Server Options
Click the Server link (in the Manage System tab) to access the Server Options page (FIG. 53). The options on this page
allow you to:
Change the port numbers (used by the Master for various Web services)
Configure the SSL settings used on the Master
Manage existing and pending license keys, manage the active NetLinx system communication parameters
Configure/modify the SSL certificates on the target Master
The options on this page are described below:
Port Settings
Allows a user to modify the server settings; specifically those port assignments associated with individual services.
All items can be either enabled/disabled via the Enabled checkboxes.
The port number values (except the FTP port) can be modified in this page.
The default port for each service is listed to the right.
Server Port Settings
The following table describes each of the Port Settings presented on this page:
FIG. 53 Server Options page
Server Port Settings
Feature Description
Telnet: The port value used for Telnet communication to the target Master. Enabling this feature allows future
communication with the Master via a separate Telnet application (such as HyperTerminal).
• The default port value is 23.
• Refer to the NetLinx Security with a Terminal Connection section for more information on the related
procedures.