Specifications

WebConsole - System Options
52
NI & DVX Central Controllers - WebConsole & Programming Guide
4. To add more devices to the Diagnostics Options page:
Repeat steps 1-3.
Alternatively, you can click one of the Edit buttons to open the Edit Options window, and specify a System
Number, Device and Port for a known System Device. Select the Diagnostics messages that you want to
enable for this device and click Update.
The device will appear in the Diagnostics Options window, in the next available column (to the right of the
last device added - see FIG. 52).
Diagnostics Options Definitions
The following table describes each of diagnostics options that can be enabled via the Edit Options window:
FIG. 52 Edit Options window indicating four devices with Diagnostics enabled
You can monitor diagnostics for up to eight System Devices in this page.
Diagnostic Options
Diagnostic Option Description
All Notifications: Enables every notification field.
System
• Number
•Device
•Port:
Use these fields to enter a Device:Port:System (D:P:S) combination for the device for which
you want to enable notifications. A value of 0 for any option gives you all of the systems,
devices, or ports. This dialog also allows you to store/recall presets.
Messages
• Online/Offline Generates a message when there is a change in the target device’s online/offline status.
• Configuration Generates a message when there is a change in the target device’s configuration.
• Status Generates a message when there is a change in the target device’s status.
Channel Changes
• Input Generates a message when there is an input channel change (i.e. Push/Release) in the target
device.
• Output Generates a message when there is an output channel change (i.e. CHON/CHOFF) in the
target device.
• Feedback Generates a message when there is a feedback channel change in the target device.