Specifications

WebConsole - System Options
49
NI & DVX Central Controllers - WebConsole & Programming Guide
Manage System - Diagnostics Options
Click the Diagnostics link (in the Manage System tab) to access the Diagnostics Options page (FIG. 48). The options on
this page allow authorized users to enable and monitor various diagnostic messages coming from and going to System
Devices.
Enabling Diagnostics On a Selected System Device
1. Select the device that you want to Control or Emulate, via the Device Tree:
a. Click the Show Device Tree option to show the Device Tree window (if it is not already enabled).
b. In the Device Tree, click on the Information (i) icon for the device for which you want to enable or modify
Diagnostics options. This opens a Network Settings page showing detailed information on the selected device
(including network configuration details). An example Network Settings page is shown in FIG. 49:
c. Click on the Diagnostics link. This opens a Diagnostics Options page for the selected device (FIG. 49).
FIG. 48 Diagnostics Options Page (with diagnostic messages enabled)
The System Number, Device Number, and Port Number value fields are read-only
(disabled). Instead of specifying these values for a System Device, select a device
via the Device Tree to populate these fields with that device’s values, as described
below.