Specifications

WebConsole - System Options
47
NI & DVX Central Controllers - WebConsole & Programming Guide
Controlling or Emulating a System Device
1. Select the device that you want to Control or Emulate, via the Device Tree:
a. Click the Show Device Tree option to show the Device Tree window (if it is not already enabled).
b. In the Device Tree, click on the Information (i) icon for the device that you want to control or emulate. This
opens a Network Settings page showing network configuration details for the selected device. See the Device
Network Settings Pages section on page 29 for details.
c. Click on the Control/Emulate link. This opens a Control/Emulate Options page for the selected device
(FIG. 47).
2. Select either the Control or Emulate option.
3. In the Channel Code section, enter a valid Channel number to emulate Channel messages (i.e., Push/Release,
CHON, and CHOFF) for the specified <D:P:S>.
The Channel number range is 1 - 65535.
The System Number, Device Number, and Port Number fields are read-only. Instead
of specifying these values for a System Device, select a device via the Device Tree to
populate these fields with that device’s information.
FIG. 47 Select Control/Emulate from within a selected Device’s Network Settings page
Click on Control/Emulate from within
the device’s Network Settings page
to Control/Emulate that device