Specifications

WebConsole - System Options
46
NI & DVX Central Controllers - WebConsole & Programming Guide
Example: Using an NI-2100 and NI-4100:
The NI-2100 could be assigned to System 1 (with an Address of 00000).
The NI-4100 could be assigned to System 2 (with an Address of 00000).
Resetting the Master Controller to the Factory Defaults Configuration
Click the Reset To Factory Defaults button. This resets the Master to its’ factory default state. This includes:
Removal of all security settings
Removal of all user files
Resetting to DHCP
Loading an empty NetLinx program.
Once reset, the Master will be effectively in an out-of-box state.
Manage System - Control/Emulate Options
Click the Control/Emulate link (in the Manage System tab) to access the Control/Emulate Options page (FIG. 46). The
options on this page allow you to Control or Emulate a device connected to this Master.
Device Control/Emulation is accomplished by manipulating a target device’s channels, levels, and sending both send
commands and strings to the device.
To Control a device means that the program generates messages which appear to a specified device to have
come from the Master.
To Emulate a device means that the program generates messages which appear to the Master to have come
from a specified device (physical or virtual). When Emulate is selected, a Push button is added to the
Channel Code section (see
FIG. 46).
It may be necessary to refresh the browser window after the master has finished
booting (click Refresh).
FIG. 46 Manage System (Control/Emulate)
Push button only displayed if
Emulate is selected