Specifications

WebConsole - Security Options
41
NI & DVX Central Controllers - WebConsole & Programming Guide
Viewing and Editing User Security Settings
Click on any User listed in the User Security Details page to view and edit security settings for the selected User
(FIG. 43):
Click the Edit button to edit the Security Access options for the selected User.
Click Delete to delete the selected User from the Master.
Deleting a User
1. Select the User Level tab (in the Security section) to open the User Security Details page.
2. Press the Delete button to remove the selected User and refresh the page. The system will prompt you to verify this
action - click OK to proceed.
If you are not logged into the Master, you receive a reminder message: "You must login before Security Settings can
be changed". In this case, log into the Master and repeat the previous steps.
3. Reboot the Master via the Reboot button on the Manage System Page (select the System control button to access).
FIG. 43 User Level Security Settings Page (Viewing User Security Settings Details)
Click to edit Access settings for this User
Click to delete this User