Specifications

Upgrading Firmware
21
NI & DVX Central Controllers - WebConsole & Programming Guide
Upgrading Firmware Files
1. In NetLinx Studio. click on the OnLine Tree tab (in the Workspace Bar) to view the devices on the System.
2. In the OnLine Tree tab, click Display and select Refresh System from the context menu. This establishes a new
connection to the System and populates the device tree with devices on that system.
3. After the Communication Verification dialog indicates active communication between the PC and the Central
Controller, verify the Master and associated devices (including the Device Controller and A/V Switcher/Scaler for
Enova DVX) are listed in the OnLine Tree.
4. In NetLinx Studio, select Tools > Firmware Transfers > Send to NetLinx Device (FIG. 25):
This opens the Send To NetLinx Device dialog.
5. Click the Browse button (...) to locate and select the firmware (*.kit) file that will be transferred, in the Browse for
Fold er s dialog (FIG. 26):
The selected file is indicated in the Files window.
These steps assume that you have already established a connection with the target
Central Controller (see the Initial Configuration section on page 5 for details).
FIG. 25 NetLinx Studio - Tools > Firmware Transfers > Send To NetLinx Device
FIG. 26 NetLinx Studio - Send To NetLinx Device dialog