Specifications

Initial Configuration
6
NI & DVX Central Controllers - WebConsole & Programming Guide
3. Click the Communications Settings button to open the Communications Settings dialog (FIG. 4):
4. Select NetLinx Master under Platform Selection to indicate you are working with a NetLinx Master.
5. Select the Serial tab to view the serial options (FIG. 5).
6. On the Serial tab, set the COM port parameters (used to communicate to the NetLinx Master).
Default serial settings for NetLinx Masters are:
7. Click OK to close the Communication Settings dialog.
FIG. 4 Communication Settings dialog - Recent tab
FIG. 5 Communications Settings dialog - Serial tab
• Comm Port: COM 1
• Baud Rate: 38400
• Data Bits: 8
• Parity: None
•Stop Bits: 1
• Flow Control: None