Specifications

Terminal (Program Port/Telnet) Commands
117
NI & DVX Central Controllers - WebConsole & Programming Guide
9) Delete group
10) Show list of authorized groups
11) Set Telnet Timeout in seconds
12) Display Telnet Timeout in seconds
13) Enter LDAP security information
14) Test connection to the LDAP server
15) Make changes permanent by saving to flash
16) Reset Database
17) Display Database
Or <ENTER> to return to previous menu
Security Setup ->
2. To enable LDAP, enter 1 and press Enter. The following will be output to the screen:
NetLinx Master security is Enabled
Do you want to keep NetLinx Master security enabled? (y or n):
3. To proceed, enter y and press enter. The following menu will be displayed:
Select to change current security option
1) Terminal (RS232) Security...........Enabled
2) HTTP Security.......................Enabled
3) Telnet Security.....................Enabled
4) Configuration Security..............Enabled
5) ICSP Security.......................Disabled
6) ICSP Encryption Required............Disabled
7) LDAP Security.......................Disabled
Or <ENTER> to return to previous menu
4. To enable LDAP Security, enter 7 and press Enter. The same menu will be sent to the screen with LDAP Security
set to Enabled. Press enter to return to the Security Setup menu.
5. When back to the Security Setup menu, enter 13 and press Enter.
A prompt to enter the LDAP URI will be displayed. Once the URI is entered and enter is pressed, a prompt for the
next LDAP parameter will be displayed.
This will continue until all parameters are entered and then the Security Setup menu will be displayed again.
6. To save the security setup, enter 15 and press Enter.
7. To test the connection to the server enter 14 and press Enter.
This test does a bind to the BIND DN using the Search Password entered. If the bind is successful, "Connection
successful" is printed on the screen. If the server could not be reached or the bind is unsuccessful, "Could not
connect to server" is printed on the screen.
8. Press Enter to return to the main menu.
Security Options Menu
Select "Set system security" from the Setup Security Menu to access the Security Options menu, described below:
Options 3 - 10 (Add user, Edit user, Delete user, Show the list of authorized users,
Add group, Edit group, Delete group, Show list of authorized groups) on the Security
Setup menu are disabled when LDAP is enabled.
Security Options Menu
Command Description
1) Terminal (RS232) Security
(Enabled/Disabled)
This selection enables/disables Terminal Security. on the Program (RS232) Port.If
Terminal Security is enabled, a user must have sufficient access rights to login to a
Program Port terminal session.
2) HTTP Security 
(Enabled/Disabled)
This selection enables/disables HTTP (Web Server) Security. If HTTP Security is
enabled, a user must have sufficient access rights to access the Master’s
WebConsole via a web browser.