Specifications

Terminal (Program Port/Telnet) Commands
115
NI & DVX Central Controllers - WebConsole & Programming Guide
6) Show the list of authorized users
7) Add group
8) Edit group
9) Delete group
10) Show list of authorized groups
11) Set Telnet Timeout in seconds
12) Display Telnet Timeout in seconds
13) Enter LDAP security information
14) Test connection to the LDAP server
15) Make changes permanent by saving to flash
16) Reset Database
17) Display Database
Or <ENTER> to return to previous menu
Security Setup ->
3. The Setup Security menu shows a list of choices and a prompt. To select one of the listed choices, simply enter the
number of the choice (1 - 17) at the prompt and press <Enter>.
Each option in the Setup Security menu displays a submenu specific to that option. The following subsections describe
using each of the Setup Security menu options.
Setup Security Menu
The Setup Security menu is described below:
Changes made to the target Master from within the Terminal window are not reflected
within the web browser, until the Master is rebooted and the web browser connection
is refreshed. Any changes made to the Master, from within the web browser are
instantly reflected within the Terminal session without the need to reboot.
Setup Security Menu
Command Description
1) Set system security 
options for NetLinx Master
See the Security Options Menu section
on page 117 for descriptions of each
menu item.
This selection will bring up the Security Options Menu that allows you to
change the security options for the NetLinx Master. These are "global" options
that enable rights given to users and groups.
For instance, if you want to disable Telnet security for all users, you would
simply go to this menu and disable Telnet security for the entire Master. This
would allow any user, whether they have the rights to Telnet or not.
These options can be thought of as options to turn on security for different
features of the NetLinx Master.
2) Display system security 
options for NetLinx Master
This selection will display the current security options for the NetLinx Master.
3) Add user
This selection will prompt you for a name for the User you are adding. The
User name must be a unique alpha-numeric string (4 - 20 characters).
Note: User and Group names are case sensitive.
After the User is added, you will be taken to the Edit User menu to setup the
new User’s right (see page 118).
4) Edit user
This selection will prompt you select a User to edit properties for. Once you
have selected the User you want to edit, it will take you to the Edit User menu
so you can edit the User's rights (see page 118).
5) Delete user
This selection will prompt you select a user to delete.
6) Show the list of authorized
users
This selection displays a list of users.
7) Add group
This selection will prompt you for a name for the Group you are adding. The
Group name must be a unique alpha-numeric string (4 - 20 characters).
Note: User and Group names are case sensitive.
After the Group is added, you will be taken to the Edit Group menu to setup
the new users right (see page 118).