Specifications
Terminal (Program Port/Telnet) Commands
113
NI & DVX Central Controllers - WebConsole & Programming Guide
Terminal Commands (Cont.)
Command Description
SHOW START LOG <START> Displays the startup log (see START LOG below).
<START> specifies the message to begin the display.
'ALL' will display all startup log messages.
Note: This command is identical in implementation to the SHOW LOG command
(see page 111), except that it executes the startup log.
SHOW SYSTEM <S> Displays a list of all devices in all systems currently on-line. The systems lists are
either directly connected to this Master (i.e. 1 hop away), or are referenced in the
DEFINE_DEVICE section of the NetLinx program. Optionally, you may provide the
desired system number as a parameter to display only that system's information
(e.g. SHOW SYSTEM 2001).
The systems listed are in numerical order.
Example:
>SHOW SYSTEM
Local devices for system #50 (This System)
------------------------------------------------------------
Device (ID)Model (ID)Mfg FWID Version
00000 (00256)Master (00001)AMX Corp. 00256 v2.10.75
(PID=0:OID=0) Serial='2010-12090',0,0,0,0,0,0
Physical Address=NeuronID 000239712501
(00256)vxWorks Image (00001) 00257 v2.00.77
(PID=0:OID=1) Serial=N/A
(00256)BootROM (00001) 00258 v2.00.76
(PID=0:OID=2) Serial=N/A
(00256)AXlink I/F uContr(00001) 00270 v1.02
(PID=0:OID=3) Serial=0000000000000000
00096 (00192)VOLUME 3 CONTROL BO(00001)AMX Corp. 00000 v2.10
(PID=0:OID=0) Serial=0000000000000000
Physical Address=Axlink
00128 (00188)COLOR LCD TOUCH PAN(00001)AMX Corp. 32778 v5.01d
(PID=0:OID=0) Serial=0000000000000000
Physical Address=Axlink
05001 (00257)NXI Download (00001)AMX Corp. 00260 v1.00.20
(PID=0:OID=0) Serial=0,0,0,0,0,0,0,0,0,0,0,0,
Physical Address=NeuronID 000189145801
(00257)NXI/NXI-1000 Boot(00001) 00261 v1.00.00
(PID=0:OID=1) Serial=0,0,0,0,0,0,0,0,0,0,0,0,
10002 (00003)PHAST PLK-IMS (00001)Phast Corp 0003 v3.12
(PID=0:OID=0) Serial=0000000000000000
Physical Address=NeuronID 0100417BD800
START LOG (ON|OFF) Enables and disables the collection of startup log messages. Once enabled, the first
x number of logs will be retained at startup for subsequent review via the "show start
log" command. Use SET LOG COUNT (page 106) to set the number of log message
that are retained.
TCP LIST Displays a list of active TCP/IP connections.
Example:
>TCP LIST
The following TCP connections exist(ed):
1: IP=192.168.21.56:1042 Socket=0 (Dead)
2: IP=192.168.21.56:1420 Socket=0 (Dead)
TIME Displays the current time on the Master.
Example:
>TIME
13:42:04
URL LIST <D:P:S> Displays the list of URL addresses programmed in the Master (or another system if
specified).
Example:
>URL LIST
The following URLs exist in the URL connection list
->Entry 0-192.168.13.65:1319 IP=192.168.13.65 State=Connected
Entry 1-192.168.13.200:1319 IP=192.168.13.200 State=Issue Connect