Specifications

Terminal (Program Port/Telnet) Commands
102
NI & DVX Central Controllers - WebConsole & Programming Guide
Terminal Commands (Cont.)
Command Description
PASS [D:P:S or NAME] Sets up a pass through mode to a device. In pass through mode, any string received
by the device is displayed on the screen, and anything typed is sent as a string to
the device. The device can be on any system that the Master you are connected to
is able to reach. You can specify the device number, port, and system, or the name
of the device that is defined in the DEFINE_DEVICE section of the program.
• Mode is exited by ++ ESC ESC.
• Display Format is set by ++ ESC n
Where n =
A, format = ASCII
D, format = Decimal
H = Hex
Note: Refer to the ESC Pass Codes section on page 114 for detailed descriptions of
the supported pass codes.
Example:
>pass[5001:7:4]
Entering pass mode.
PHYSICAL STATUS Retrieve the current LED states.
PING [ADDRESS] Pings an address (IP or URL), to test network connectivity to and confirms the
presence of another networked device. The syntax is just like the PING application
in Windows or Linux.
Example:
>ping 192.168.29.209
192.168.29.209 is alive.
PROGRAM INFO Displays a list of program files and modules residing on the Master.
Example:
>PROGRAM INFO
-- Program Name Info
-- Module Count = 1
1 Name is i!-PCLinkPowerPointTest
-- File Names = 2
1 = C:\Program Files\AMX Applications\i!-PCLinkPowerPoint
2 = C:\Program Files\Common Files\AMXShare\AXIs\NetLinx.axi
2 = Name is MDLPP
-- File Names = 2
1 C:\AppDev\i!-PCLink-PowerPoint\i!-PCLinkPowerPointMod.axs
2 C:\Program files\Common Files\AMXShare\AXIs\NetLinx.axi
PULSE [D:P:S or NAME,CHAN] Pulses a specified channel on a device on and off. The device can be on any
system the Master you are connected to can reach. You can specify the device
number, port, and system; or the name of the device that is defined in the
DEFINE_DEVICE section of the program.
Example:
>PULSE[50001:8:50,1]
Sending Pulse[50001:8:50,1]
PWD Displays the name of the current directory.
Example:
pwd
The current directory is doc:
REBOOT <D:P:S> Reboots the Master or specified device.
Example:
>REBOOT [0:1:0]
Rebooting...
RENEW DHCP Renews/Releases the current DHCP lease for the Master.
Note: The Master must be rebooted to acquire a new DHCP lease.
Example:
>RENEW DHCP