User manual

Appendix A Specifications

Shock and Vibration

Operational shock .................................. 30 g peak, half-sine, 11 ms pulse

(Tested in accordance with

IEC-60068-2-27. Test profile

developed in accordance with

MIL-PRF-28800F.)

Random vibration

Operating ........................................ 5 to 500 Hz, 0.3 g

rms

(with solid-state hard drive)

Nonoperating .................................. 5 to 500 Hz, 2.4 g

rms

(Tested in accordance with

IEC-60068-2-64. Nonoperating

test profile exceeds the

requirements of

MIL-PRF-28800F, Class 3.)

To meet these shock and vibration specifications, you must panel mount

or wall mount the NI 3100/3110, affix ferrules to the ends of all terminal

wires, and install tie wraps on the Ethernet and power cables.

Safety

This product meets the requirements of the following standards of safety

for electrical equipment for measurement, control, and laboratory use:

• IEC 60950-1, EN 60950-1

• UL 60950-1, CSA 60950-1

Note For UL and other safety certifications, refer to the product label or the Online

Product Certification section.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards

for electrical equipment for measurement, control, and laboratory use:

• EN 55024: Industrial Immunity

• EN 55022 (CISPR 22): Group 1, Class A emissions

• AS/NZS CISPR 22: Group 1, Class A emissions

• FCC 47 CFR Part 15B: Class A emissions

• ICES-001: Class A emissions