Specifications

WebConsole - System Options
42
NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)
2. Select either the Control or Emulate option.
3. In the Channel Code section, enter a valid Channel number to emulate Channel messages (i.e., Push/
Release, CHON, and CHOFF) for the specified <D:P:S>.
The Channel number range is 1 - 65535.
Select the On or Off buttons to Emulate Channel ON (CHON) and Channel OFF (CHOFF) messages for
the specified <D:P:S>.
4. Select the Push button to Emulate a push/release on the specified channel (not displayed if the Control
option is selected). Click and hold the Push button to observe how the device/Master responds to the push
message.
5. In the Level Code section, enter a valid Level number and Level data value for the specified <D:P:S> and
press the Send button to transmit the level data.
The Level number range is 1 - 65535.
The table below lists the valid Level data types and their ranges:
FIG. 37 Select Control/Emulate from within a selected Device’s Network Settings page
Click on Control/Emulate from within
the device’s Network Settings page
to Control/Emulate that device