Specifications

WebConsole - Security Options
27
NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)
System Security - System Level
System Level Security options provide authorized users the ability to alter the current security options of the
entire system assigned to the Master. The options provided on this tab depend on the firmware version
currently loaded on the Master:
If your Master is currently running a firmware version that pre-dates v4.x.x, then there are two
System Level Security pages available, accessible via the System Security Settings and 
IPSec Security Settings links in the System Level Tab (FIG. 24).
By default, the System Security Settings page is displayed.
If your Master is currently running firmware version 4.x.x or higher, these options are not provided.
In this case, the System Security Settings page is the only view.
System Level Security - System Security Settings
Click the System Security Settings link to access the System Security Details page (FIG. 25). The options in
this page allow you to establish wether the Master will require a valid username and password be entered prior
to gaining access to the configuration options.
These are global options that enable or disable the login requirement for both users and groups.
FIG. 24 System Security Details Page - System Security Settings and I PSec Security Settings page links
FIG. 25 System Security Settings Page
On NetLinx Masters with firmware that pre-dates v4.x.x, these
links provide access to two System-Level Security settings pages
(System Security Settings & IPSec Security Settings).
NetLinx Masters with firmware version 4.x.x or higher do not
provide these options.
Instead, the System Security Settings are provided on this page.