Specifications

Terminal (Program Port/Telnet) Commands
114
NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)
Terminal Commands (Cont.)
Command Description
SHOW ROUTE Displays information about how this NetLinx Master is connected to other
NetLinx Masters (routing information).
E
xample:
>SHOW ROUTE
Route Data:
System Route Metric PhyAddress
--------------------------------
-> 50 50 0 AxLink
SHOW START LOG <START> Displays the startup log (see START LOG below).
<START> specifies the message to begin the display.
'ALL' will display all startup log messages.
Note: This command is identical in implementation to the SHOW LOG
command (see page 112), except that it executes the startup log.
SHOW SYSTEM <S> Displays a list of all devices in all systems currently on-line.
The systems lists are either directly connected to this Master (i.e. 1 hop
away), or are referenced in the DEFINE_DEVICE section of the NetLinx
program.
Optionally, you may provide the desired system number as a 
parameter to display only that system's information (e.g. SHOW 
SYSTEM 2001).
The systems listed are in numerical order.
Example:
>SHOW SYSTEM
Local devices for system #50 (This System)
------------------------------------------------------------
Device (ID)Model (ID)Mfg FWID Version
00000 (00256)Master (00001)AMX Corp. 00256 v2.10.75
(PID=0:OID=0) Serial='2010-12090',0,0,0,0,0,0
Physical Address=NeuronID 000239712501
(00256)vxWorks Image (00001) 00257 v2.00.77
(PID=0:OID=1) Serial=N/A
(00256)BootROM (00001) 00258 v2.00.76
(PID=0:OID=2) Serial=N/A
(00256)AXlink I/F uContr(00001) 00270 v1.02
(PID=0:OID=3) Serial=0000000000000000
00096 (00192)VOLUME 3 CONTROL BO(00001)AMX Corp.00000 v2.10
(PID=0:OID=0) Serial=0000000000000000
Physical Address=Axlink
00128 (00188)COLOR LCD TOUCH PAN(00001)AMX Corp.32778 v5.01d
(PID=0:OID=0) Serial=0000000000000000
Physical Address=Axlink
05001 (00257)NXI Download (00001)AMX Corp. 00260
v1.00.20
(PID=0:OID=0) Serial=0,0,0,0,0,0,0,0,0,0,0,0,
Physical Address=NeuronID 000189145801
(00257)NXI/NXI-1000 Boot(00001) 00261 v1.00.00
(PID=0:OID=1) Serial=0,0,0,0,0,0,0,0,0,0,0,0,
10002 (00003)PHAST PLK-IMS (00001)Phast Corp 0003 v3.12
(PID=0:OID=0) Serial=0000000000000000
Physical Address=NeuronID 0100417BD800
START LOG (ON|OFF) Enables and disables the collection of startup log messages.
Once enabled, the first x number of logs will be retained at startup for sub-
sequent review via the "show start log" command.
Use SET LOG COUNT (page 104) to set the number of log message that
are retained.
TCP LIST Displays a list of active TCP/IP connections.
Example:
>TCP LIST
The following TCP connections exist(ed):
1: IP=192.168.21.56:1042 Socket=0 (Dead)
2: IP=192.168.21.56:1420 Socket=0 (Dead)