Specifications

Terminal (Program Port/Telnet) Commands
107
NetLinx Integrated Controllers- WebConsole & Programming Guide (FMv3)
Terminal Commands (Cont.)
Command Description
SET SECURITY PROFILE (Cont.) DoD:
DoD security profile has all of the security specifications of "secure" pro-
file along with the following additional features:
• The default Web login banner text consists of the following: "This is a
Department of Defense (DOD) computer system provided only for
authorized U.S. Government use. This system may be monitored for all
lawful purposes. All information, including personal information, placed
on or sent over this system, may be monitored. Use of this DOD
computer system, authorized or unauthorized, constitutes consent to
monitoring of this system. Unauthorized use may subject you to
criminal prosecution and penalties."
• The default Web login banner text can be overridden by providing a
banner.txt file in the /user directory.
• The SSH and terminal interface will display the following banner after a
successful login: "DOD use only! Subject to monitoring, reporting,
prosecution, and penalties."
Secure and DoD profile configuration can be tailored with more or less
security features by manually altering the Master's configuration 
following the secure profile selection.
For example, the Master can be put into "secure" profile and then the
HTTP and Telnet interfaces can be manually re-enabled via their 
existing configuration mechanism. This would enable all of the new secu-
rity features provided by the "secure" profile but still allow Master access
via HTTP and Telnet.
Note: When transitioning from secure or DoD profile to the "non"

profile, user accounts are NOT wiped and the "administrator" and "netlinx"
accounts will retain their secure passwords.
SET SNMP Sets SNMP read and write community strings. This command invokes the
SET SNMP sub-menu:
>SET SNMP
--- Enter New Values or just hit Enter to keep current
settings
SNMP Enabled (Y or N)? N y
Enter System Description: NetLinx VxWorks SNMPv1/v2c Agent
Enter System Contact: AMX LLC
Enter System Location: Richardson, TX USA
Enter Read community string: public
Enter Write community string:private
You have entered:
Description = NetLinx VxWorks SNMPv1/v2c Agent
Contact = AMX LLC
Location = Richardson, TX USA
Read Community = public
Write Community = private
Is this correct? Type Y or N and Enter->
Note: The "System Description", "System Contact" and "System 
Location" are the values that will be published for the Master via SNMP.
The system must be rebooted once the new values are entered.